/**
******************************************************************************
* @file py32f403_ll_bus.h
* @author MCU Application Team
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* © Copyright (c) 2023 Puya Semiconductor Co.
* All rights reserved.
*
* This software component is licensed by Puya under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
* @attention
*
* © Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef PY32F403_LL_BUS_H
#define PY32F403_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "py32f4xx.h"
/** @addtogroup PY32F403_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @{
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @{
*/
#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHB1ENR_SRAMEN
#define LL_AHB1_GRP1_PERIPH_FMC RCC_AHB1ENR_FMCEN
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
#define LL_AHB1_GRP1_PERIPH_SDIO RCC_AHB1ENR_SDIOEN
#define LL_AHB1_GRP1_PERIPH_ESMC RCC_AHB1ENR_ESMCEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
* @{
*/
#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_IOPAEN
#define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_IOPBEN
#define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_IOPCEN
#define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_IOPDEN
#define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_IOPEEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @{
*/
#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN
#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN
#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN
#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN
#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
#define LL_APB1_GRP1_PERIPH_BKP RCC_APB1ENR_BKPEN
#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
#define LL_APB1_GRP1_PERIPH_CTC RCC_APB1ENR_CTCEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
* @{
*/
#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN
#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN
#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN
#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN
#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @{
*/
/** @defgroup BUS_LL_EF_AHB1_GRP1 AHB1 GRP1
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FMC
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO
* @arg @ref LL_AHB1_GRP1_PERIPH_ESMC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FMC
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO
* @arg @ref LL_AHB1_GRP1_PERIPH_ESMC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable AHB1 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FMC
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO
* @arg @ref LL_AHB1_GRP1_PERIPH_ESMC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1ENR, Periphs);
}
/**
* @brief Force AHB1 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO
* @arg @ref LL_AHB1_GRP1_PERIPH_ESMC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO
* @arg @ref LL_AHB1_GRP1_PERIPH_ESMC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB1RSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_AHB2_GRP1 AHB2 GRP1
* @{
*/
/**
* @brief Enable AHB2 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB2 peripheral clock is enabled or not
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1UL : 0UL);
}
/**
* @brief Disable AHB2 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2ENR, Periphs);
}
/**
* @brief Force AHB2 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_ALL
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @brief Release AHB2 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB2_GRP1_PERIPH_ALL
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHB2RSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1
* @{
*/
/**
* @brief Enable APB1 GRP1 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_USART4
* @arg @ref LL_APB1_GRP1_PERIPH_USART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_CAN
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_CTC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 GRP1 peripheral clock is enabled or not
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_USART4
* @arg @ref LL_APB1_GRP1_PERIPH_USART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_CAN
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_CTC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB1ENR, Periphs) == (Periphs)) ? 1UL : 0UL);
}
/**
* @brief Disable APB1 GRP1 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_USART4
* @arg @ref LL_APB1_GRP1_PERIPH_USART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_CAN
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_CTC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR, Periphs);
}
/**
* @brief Force APB1 GRP1 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_USART4
* @arg @ref LL_APB1_GRP1_PERIPH_USART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_CAN
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_CTC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @brief Release APB1 GRP1 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3
* @arg @ref LL_APB1_GRP1_PERIPH_USART4
* @arg @ref LL_APB1_GRP1_PERIPH_USART5
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2
* @arg @ref LL_APB1_GRP1_PERIPH_USB
* @arg @ref LL_APB1_GRP1_PERIPH_CAN
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_CTC
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2_GRP1 APB2 GRP1
* @{
*/
/**
* @brief Enable APB2 GRP1 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB2 GRP1 peripheral clock is enabled or not
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return ((READ_BIT(RCC->APB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL);
}
/**
* @brief Disable APB2 GRP1 peripherals clock.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB2 GRP1 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ALL
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB2 GRP1 peripherals reset.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ALL
* @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11
* @note Depending on devices and packages, some peripherals may not be available.
* Refer to device datasheet for peripherals availability.
* @note (*) peripheral not available on all devices
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* RCC */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* PY32F403_LL_BUS_H */
/************************ (C) COPYRIGHT Puya *****END OF FILE****/