/**
******************************************************************************
* @file py32f403_ll_system.h
* @author MCU Application Team
* @brief Header file of SYSTEM LL module.
******************************************************************************
* @attention
*
* © Copyright (c) 2023 Puya Semiconductor Co.
* All rights reserved.
*
* This software component is licensed by Puya under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
* @attention
*
* © Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef PY32F403_LL_SYSTEM_H
#define PY32F403_LL_SYSTEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "py32f4xx.h"
/** @addtogroup PY32F403_LL_Driver
* @{
*/
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
/** @defgroup SYSTEM_LL SYSTEM
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
* @{
*/
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
* @{
*/
#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_ESMC SYSCFG_CFGR1_MEM_MODE_1 /*!< ESMC mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_I2C_ANF I2C ANALOG FILTER ENABLE CONTORL
* @{
*/
#define LL_SYSCFG_I2C_ANF_PB5 SYSCFG_CFGR1_I2C_PB5
#define LL_SYSCFG_I2C_ANF_PB6 SYSCFG_CFGR1_I2C_PB6
#define LL_SYSCFG_I2C_ANF_PB7 SYSCFG_CFGR1_I2C_PB7
#define LL_SYSCFG_I2C_ANF_PB8 SYSCFG_CFGR1_I2C_PB8
#define LL_SYSCFG_I2C_ANF_PB9 SYSCFG_CFGR1_I2C_PB9
#define LL_SYSCFG_I2C_ANF_PB10 SYSCFG_CFGR1_I2C_PB10
#define LL_SYSCFG_I2C_ANF_PB11 SYSCFG_CFGR1_I2C_PB11
#define LL_SYSCFG_I2C_ANF_PB12 SYSCFG_CFGR1_I2C_PB12
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TIMBREAK TIMER BREAK INPUT
* @{
*/
#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
#define LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL SYSCFG_CFGR2_LOCKUP_LOCK
#endif
#if defined(SYSCFG_CFGR2_PVD_LOCK)
#define LL_SYSCFG_TIMBREAK_PVD_TO_ALL SYSCFG_CFGR2_PVD_LOCK
#endif
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_DMA_MAP DMA MAP
* @{
*/
#define LL_SYSCFG_DMA_MAP_ADC1 0x00000000U
#define LL_SYSCFG_DMA_MAP_ADC2 0x00000001U
#define LL_SYSCFG_DMA_MAP_ADC3 0x00000002U
#if defined(DAC1)
#define LL_SYSCFG_DMA_MAP_DAC1 0x00000003U
#define LL_SYSCFG_DMA_MAP_DAC2 0x00000004U
#endif /* DAC1 */
#define LL_SYSCFG_DMA_MAP_SPI1_RD 0x00000005U
#define LL_SYSCFG_DMA_MAP_SPI1_WR 0x00000006U
#define LL_SYSCFG_DMA_MAP_SPI2_RD 0x00000007U
#define LL_SYSCFG_DMA_MAP_SPI2_WR 0x00000008U
#define LL_SYSCFG_DMA_MAP_SPI3_RD 0x00000009U
#define LL_SYSCFG_DMA_MAP_SPI3_WR 0x0000000AU
#define LL_SYSCFG_DMA_MAP_USART1_RD 0x0000000BU
#define LL_SYSCFG_DMA_MAP_USART1_WR 0x0000000CU
#define LL_SYSCFG_DMA_MAP_USART2_RD 0x0000000DU
#define LL_SYSCFG_DMA_MAP_USART2_WR 0x0000000EU
#define LL_SYSCFG_DMA_MAP_USART3_RD 0x0000000FU
#define LL_SYSCFG_DMA_MAP_USART3_WR 0x00000010U
#define LL_SYSCFG_DMA_MAP_USART4_RD 0x00000011U
#define LL_SYSCFG_DMA_MAP_USART4_WR 0x00000012U
#define LL_SYSCFG_DMA_MAP_USART5_RD 0x00000013U
#define LL_SYSCFG_DMA_MAP_USART5_WR 0x00000014U
#define LL_SYSCFG_DMA_MAP_I2C1_RD 0x00000015U
#define LL_SYSCFG_DMA_MAP_I2C1_WR 0x00000016U
#define LL_SYSCFG_DMA_MAP_I2C2_RD 0x00000017U
#define LL_SYSCFG_DMA_MAP_I2C2_WR 0x00000018U
#define LL_SYSCFG_DMA_MAP_TIM1_CH1 0x00000019U
#define LL_SYSCFG_DMA_MAP_TIM1_CH2 0x0000001AU
#define LL_SYSCFG_DMA_MAP_TIM1_CH3 0x0000001BU
#define LL_SYSCFG_DMA_MAP_TIM1_CH4 0x0000001CU
#define LL_SYSCFG_DMA_MAP_TIM1_COM 0x0000001DU
#define LL_SYSCFG_DMA_MAP_TIM1_TRIG 0x0000001EU
#define LL_SYSCFG_DMA_MAP_TIM1_UP 0x0000001FU
#define LL_SYSCFG_DMA_MAP_TIM2_CH1 0x00000020U
#define LL_SYSCFG_DMA_MAP_TIM2_CH2 0x00000021U
#define LL_SYSCFG_DMA_MAP_TIM2_CH3 0x00000022U
#define LL_SYSCFG_DMA_MAP_TIM2_CH4 0x00000023U
#define LL_SYSCFG_DMA_MAP_TIM2_UP 0x00000024U
#define LL_SYSCFG_DMA_MAP_TIM3_CH1 0x00000025U
#define LL_SYSCFG_DMA_MAP_TIM3_CH3 0x00000026U
#define LL_SYSCFG_DMA_MAP_TIM3_CH4 0x00000027U
#define LL_SYSCFG_DMA_MAP_TIM3_UP 0x00000028U
#define LL_SYSCFG_DMA_MAP_TIM3_TRIG 0x00000029U
#define LL_SYSCFG_DMA_MAP_TIM4_CH1 0x0000002AU
#define LL_SYSCFG_DMA_MAP_TIM4_CH2 0x0000002BU
#define LL_SYSCFG_DMA_MAP_TIM4_CH3 0x0000002CU
#define LL_SYSCFG_DMA_MAP_TIM4_UP 0x0000002DU
#define LL_SYSCFG_DMA_MAP_TIM5_CH1 0x0000002EU
#define LL_SYSCFG_DMA_MAP_TIM5_CH2 0x0000002FU
#define LL_SYSCFG_DMA_MAP_TIM5_CH3 0x00000030U
#define LL_SYSCFG_DMA_MAP_TIM5_CH4 0x00000031U
#define LL_SYSCFG_DMA_MAP_TIM5_UP 0x00000032U
#define LL_SYSCFG_DMA_MAP_TIM5_TRIG 0x00000033U
#define LL_SYSCFG_DMA_MAP_TIM6 0x00000034U
#define LL_SYSCFG_DMA_MAP_TIM7 0x00000035U
#define LL_SYSCFG_DMA_MAP_TIM8_CH1 0x00000036U
#define LL_SYSCFG_DMA_MAP_TIM8_CH2 0x00000037U
#define LL_SYSCFG_DMA_MAP_TIM8_CH3 0x00000038U
#define LL_SYSCFG_DMA_MAP_TIM8_CH4 0x00000039U
#define LL_SYSCFG_DMA_MAP_TIM8_COM 0x0000003AU
#define LL_SYSCFG_DMA_MAP_TIM8_TRIG 0x0000003BU
#define LL_SYSCFG_DMA_MAP_TIM8_UP 0x0000003CU
#define LL_SYSCFG_DMA_MAP_TIM2_TRIG 0x0000003DU
#define LL_SYSCFG_DMA_MAP_TIM3_CH2 0x0000003EU
#define LL_SYSCFG_DMA_MAP_TIM4_CH4 0x0000003FU
#define LL_SYSCFG_DMA_MAP_TIM4_TRIG 0x00000040U
#define LL_SYSCFG_DMA_MAP_ESMC_TX 0x00000041U
#define LL_SYSCFG_DMA_MAP_ESMC_RX 0x00000042U
#define LL_SYSCFG_DMA_MAP_SDIO 0x00000043U
#define LL_SYSCFG_DMA_MAP_USB 0x00000044U
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_PORT EXTI PORT
* @{
*/
#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */
#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */
#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */
#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */
#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_LINE EXTI LINE
* @{
*/
#define LL_SYSCFG_EXTI_LINE0 (0x000FU << 16U | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE1 (0x00F0U << 16U | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE2 (0x0F00U << 16U | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE3 (0xF000U << 16U | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE4 (0x000FU << 16U | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE5 (0x00F0U << 16U | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE6 (0x0F00U << 16U | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE7 (0xF000U << 16U | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE8 (0x000FU << 16U | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE9 (0x00F0U << 16U | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE10 (0x0F00U << 16U | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE11 (0xF000U << 16U | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE12 (0x000FU << 16U | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE13 (0x00F0U << 16U | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE14 (0x0F00U << 16U | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE15 (0xF000U << 16U | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_GPIO_PORT GPIO PORT
* @{
*/
#define LL_SYSCFG_GPIO_PORTA 0x00000000U
#define LL_SYSCFG_GPIO_PORTB 0x00000001U
#define LL_SYSCFG_GPIO_PORTC 0x00000002U
#define LL_SYSCFG_GPIO_PORTD 0x00000003U
#define LL_SYSCFG_GPIO_PORTE 0x00000004U
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_GPIO_PIN GPIO PIN
* @{
*/
#define LL_SYSCFG_GPIO_PIN_0 0x00000001U
#define LL_SYSCFG_GPIO_PIN_1 0x00000002U
#define LL_SYSCFG_GPIO_PIN_2 0x00000004U
#define LL_SYSCFG_GPIO_PIN_3 0x00000008U
#define LL_SYSCFG_GPIO_PIN_4 0x00000010U
#define LL_SYSCFG_GPIO_PIN_5 0x00000020U
#define LL_SYSCFG_GPIO_PIN_6 0x00000040U
#define LL_SYSCFG_GPIO_PIN_7 0x00000080U
#define LL_SYSCFG_GPIO_PIN_8 0x00000100U
#define LL_SYSCFG_GPIO_PIN_9 0x00000200U
#define LL_SYSCFG_GPIO_PIN_10 0x00000400U
#define LL_SYSCFG_GPIO_PIN_11 0x00000800U
#define LL_SYSCFG_GPIO_PIN_12 0x00001000U
#define LL_SYSCFG_GPIO_PIN_13 0x00002000U
#define LL_SYSCFG_GPIO_PIN_14 0x00004000U
#define LL_SYSCFG_GPIO_PIN_15 0x00008000U
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_GPIO_ENA GPIO Enable Analog Mode
* @{
*/
#define LL_SYSCFG_GPIO_ENA_PA0 SYSCFG_GPIOENA_PA_ENA_0
#define LL_SYSCFG_GPIO_ENA_PA1 SYSCFG_GPIOENA_PA_ENA_1
#define LL_SYSCFG_GPIO_ENA_PA2 SYSCFG_GPIOENA_PA_ENA_2
#define LL_SYSCFG_GPIO_ENA_PA3 SYSCFG_GPIOENA_PA_ENA_3
#define LL_SYSCFG_GPIO_ENA_PA4 SYSCFG_GPIOENA_PA_ENA_4
#define LL_SYSCFG_GPIO_ENA_PA5 SYSCFG_GPIOENA_PA_ENA_5
#define LL_SYSCFG_GPIO_ENA_PA6 SYSCFG_GPIOENA_PA_ENA_6
#define LL_SYSCFG_GPIO_ENA_PA7 SYSCFG_GPIOENA_PA_ENA_7
#define LL_SYSCFG_GPIO_ENA_PB0 SYSCFG_GPIOENA_PB_ENA_0
#define LL_SYSCFG_GPIO_ENA_PB1 SYSCFG_GPIOENA_PB_ENA_1
#define LL_SYSCFG_GPIO_ENA_PC0 SYSCFG_GPIOENA_PC_ENA_0
#define LL_SYSCFG_GPIO_ENA_PC1 SYSCFG_GPIOENA_PC_ENA_1
#define LL_SYSCFG_GPIO_ENA_PC2 SYSCFG_GPIOENA_PC_ENA_2
#define LL_SYSCFG_GPIO_ENA_PC3 SYSCFG_GPIOENA_PC_ENA_3
#define LL_SYSCFG_GPIO_ENA_PC4 SYSCFG_GPIOENA_PC_ENA_4
#define LL_SYSCFG_GPIO_ENA_PC5 SYSCFG_GPIOENA_PC_ENA_5
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TIMER_CLOCK_2X Timer clock 2X pclk
* @{
*/
#define LL_SYSCFG_TIM2_3_4_5_6_7_12_13_14_SEL SYSCFG_TIM_PCLK1_SEL /*!< timer clock 2X APB1 clock */
#define LL_SYSCFG_TIM1_8_9_10_11_SEL SYSCFG_TIM_PCLK2_SEL /*!< timer clock 2X APB2 clock */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
* @{
*/
#define LL_FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */
#define LL_FLASH_LATENCY_3 (FLASH_ACR_LATENCY_0 | FLASH_ACR_LATENCY_1) /*!< FLASH Three wait state */
#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_2 /*!< FLASH Four wait state */
#define LL_FLASH_LATENCY_5 (FLASH_ACR_LATENCY_0 | FLASH_ACR_LATENCY_2) /*!< FLASH Five wait state */
#define LL_FLASH_LATENCY_6 (FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_2) /*!< FLASH Six wait state */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_DBGMCU_TRACE DBGMCU TRACE Pin Assignment
* @{
*/
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_STOP_IP DBGMCU STOP IP
* @{
*/
#if defined(DBGMCU_CR_DBG_IWDG_STOP)
#define LL_DBGMCU_IWDG_STOP DBGMCU_CR_DBG_IWDG_STOP
#endif
#if defined(DBGMCU_CR_DBG_WWDG_STOP)
#define LL_DBGMCU_WWDG_STOP DBGMCU_CR_DBG_WWDG_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM1_STOP)
#define LL_DBGMCU_TIM1_STOP DBGMCU_CR_DBG_TIM1_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM2_STOP)
#define LL_DBGMCU_TIM2_STOP DBGMCU_CR_DBG_TIM2_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM3_STOP)
#define LL_DBGMCU_TIM3_STOP DBGMCU_CR_DBG_TIM3_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM4_STOP)
#define LL_DBGMCU_TIM4_STOP DBGMCU_CR_DBG_TIM4_STOP
#endif
#if defined(DBGMCU_CR_DBG_CAN_STOP)
#define LL_DBGMCU_CAN_STOP DBGMCU_CR_DBG_CAN_STOP
#endif
#if defined(DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
#define LL_DBGMCU_I2C1_SMBUS_TIMEOUT DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT
#endif
#if defined(DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#define LL_DBGMCU_I2C2_SMBUS_TIMEOUT DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT
#endif
#if defined(DBGMCU_CR_DBG_TIM8_STOP)
#define LL_DBGMCU_TIM8_STOP DBGMCU_CR_DBG_TIM8_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM5_STOP)
#define LL_DBGMCU_TIM5_STOP DBGMCU_CR_DBG_TIM5_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM6_STOP)
#define LL_DBGMCU_TIM6_STOP DBGMCU_CR_DBG_TIM6_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM7_STOP)
#define LL_DBGMCU_TIM7_STOP DBGMCU_CR_DBG_TIM7_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM12_STOP)
#define LL_DBGMCU_TIM12_STOP DBGMCU_CR_DBG_TIM12_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM13_STOP)
#define LL_DBGMCU_TIM13_STOP DBGMCU_CR_DBG_TIM13_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM14_STOP)
#define LL_DBGMCU_TIM14_STOP DBGMCU_CR_DBG_TIM14_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM9_STOP)
#define LL_DBGMCU_TIM9_STOP DBGMCU_CR_DBG_TIM9_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM10_STOP)
#define LL_DBGMCU_TIM10_STOP DBGMCU_CR_DBG_TIM10_STOP
#endif
#if defined(DBGMCU_CR_DBG_TIM11_STOP)
#define LL_DBGMCU_TIM11_STOP DBGMCU_CR_DBG_TIM11_STOP
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
* @{
*/
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
* @{
*/
/**
* @brief Set memory mapping at address 0x00000000
* @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory
* @param Memory This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_FLASH
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
* @arg @ref LL_SYSCFG_REMAP_ESMC
* @arg @ref LL_SYSCFG_REMAP_SRAM
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
{
MODIFY_REG(SYSCFG->CFGR[0], SYSCFG_CFGR1_MEM_MODE, Memory);
}
/**
* @brief Get memory mapping at address 0x00000000
* @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_FLASH
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
* @arg @ref LL_SYSCFG_REMAP_ESMC
* @arg @ref LL_SYSCFG_REMAP_SRAM
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
{
return (uint32_t)(READ_BIT(SYSCFG->CFGR[0], SYSCFG_CFGR1_MEM_MODE));
}
/**
* @brief Enable analog filtering of I2C related IO
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param I2CAnalogFilter This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_I2C_ANF_PB5
* @arg @ref LL_SYSCFG_I2C_ANF_PB6
* @arg @ref LL_SYSCFG_I2C_ANF_PB7
* @arg @ref LL_SYSCFG_I2C_ANF_PB8
* @arg @ref LL_SYSCFG_I2C_ANF_PB9
* @arg @ref LL_SYSCFG_I2C_ANF_PB10
* @arg @ref LL_SYSCFG_I2C_ANF_PB11
* @arg @ref LL_SYSCFG_I2C_ANF_PB12
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableI2CAnalogFilter(uint32_t I2CAnalogFilter)
{
SET_BIT(SYSCFG->CFGR[0], I2CAnalogFilter);
}
/**
* @brief Disable analog filtering of I2C related IO
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param I2CAnalogFilter This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_I2C_ANF_PB5
* @arg @ref LL_SYSCFG_I2C_ANF_PB6
* @arg @ref LL_SYSCFG_I2C_ANF_PB7
* @arg @ref LL_SYSCFG_I2C_ANF_PB8
* @arg @ref LL_SYSCFG_I2C_ANF_PB9
* @arg @ref LL_SYSCFG_I2C_ANF_PB10
* @arg @ref LL_SYSCFG_I2C_ANF_PB11
* @arg @ref LL_SYSCFG_I2C_ANF_PB12
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableI2CAnalogFilter(uint32_t I2CAnalogFilter)
{
CLEAR_BIT(SYSCFG->CFGR[0], I2CAnalogFilter);
}
/**
* @brief Indicate if enable analog filtering of I2C related IO
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param I2CAnalogFilter This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_I2C_ANF_PB5
* @arg @ref LL_SYSCFG_I2C_ANF_PB6
* @arg @ref LL_SYSCFG_I2C_ANF_PB7
* @arg @ref LL_SYSCFG_I2C_ANF_PB8
* @arg @ref LL_SYSCFG_I2C_ANF_PB9
* @arg @ref LL_SYSCFG_I2C_ANF_PB10
* @arg @ref LL_SYSCFG_I2C_ANF_PB11
* @arg @ref LL_SYSCFG_I2C_ANF_PB12
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledI2CAnalogFilter(uint32_t I2CAnalogFilter)
{
return ((READ_BIT(SYSCFG->CFGR[0], I2CAnalogFilter) == (I2CAnalogFilter)) ? 1UL : 0UL);
}
/**
* @brief Enables COMPx as TIMx break input
* @note Depending on devices and packages, some Peripherals may not be available.
* Refer to device datasheet for Peripherals availability.
* @param TIMBreakInputs This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL
* @arg @ref LL_SYSCFG_TIMBREAK_PVD_TO_ALL
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableTIMBreakInputs(uint32_t TIMBreakInputs)
{
SET_BIT(SYSCFG->CFGR[1], TIMBreakInputs);
}
/**
* @brief Disables COMPx as TIMx break input
* @note Depending on devices and packages, some Peripherals may not be available.
* Refer to device datasheet for Peripherals availability.
* @param TIMBreakInputs This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL
* @arg @ref LL_SYSCFG_TIMBREAK_PVD_TO_ALL
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableTIMBreakInputs(uint32_t TIMBreakInputs)
{
CLEAR_BIT(SYSCFG->CFGR[1], TIMBreakInputs);
}
/**
* @brief Indicate if COMPx as TIMx break input
* @note Depending on devices and packages, some Peripherals may not be available.
* Refer to device datasheet for Peripherals availability.
* @param TIMBreakInputs This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL
* @arg @ref LL_SYSCFG_TIMBREAK_PVD_TO_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledTIMBreakInputs(uint32_t TIMBreakInputs)
{
return ((READ_BIT(SYSCFG->CFGR[1], TIMBreakInputs) == (TIMBreakInputs)) ? 1UL : 0UL);
}
/**
* @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableRemap_ADC1_ETRGINJ(void)
{
SET_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC1_ETRGINJ_REMAP);
}
/**
* @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableRemap_ADC1_ETRGINJ(void)
{
CLEAR_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC1_ETRGINJ_REMAP);
}
/**
* @brief Check if ADC1_ETRGINJ has been remaped or not
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledRemap_ADC1_ETRGINJ(void)
{
return (READ_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC1_ETRGINJ_REMAP) == (SYSCFG_CFGR2_ADC1_ETRGINJ_REMAP));
}
/**
* @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableRemap_ADC1_ETRGREG(void)
{
SET_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC1_ETRGREG_REMAP);
}
/**
* @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableRemap_ADC1_ETRGREG(void)
{
CLEAR_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC1_ETRGREG_REMAP);
}
/**
* @brief Check if ADC1_ETRGREG has been remaped or not
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledRemap_ADC1_ETRGREG(void)
{
return (READ_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC1_ETRGREG_REMAP) == (SYSCFG_CFGR2_ADC1_ETRGREG_REMAP));
}
/**
* @brief Enable the remapping of ADC2_ETRGINJ (ADC 2 External trigger injected conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableRemap_ADC2_ETRGINJ(void)
{
SET_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC2_ETRGINJ_REMAP);
}
/**
* @brief Disable the remapping of ADC2_ETRGINJ (ADC 2 External trigger injected conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableRemap_ADC2_ETRGINJ(void)
{
CLEAR_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC2_ETRGINJ_REMAP);
}
/**
* @brief Check if ADC2_ETRGINJ has been remaped or not
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledRemap_ADC2_ETRGINJ(void)
{
return (READ_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC2_ETRGINJ_REMAP) == (SYSCFG_CFGR2_ADC2_ETRGINJ_REMAP));
}
/**
* @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableRemap_ADC2_ETRGREG(void)
{
SET_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC2_ETRGREG_REMAP);
}
/**
* @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableRemap_ADC2_ETRGREG(void)
{
CLEAR_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC2_ETRGREG_REMAP);
}
/**
* @brief Check if ADC2_ETRGREG has been remaped or not
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledRemap_ADC2_ETRGREG(void)
{
return (READ_BIT(SYSCFG->CFGR[1], SYSCFG_CFGR2_ADC2_ETRGREG_REMAP) == (SYSCFG_CFGR2_ADC2_ETRGREG_REMAP));
}
/**
* @brief Configure source input for the EXTI external interrupt.
* @param Port This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
{
MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16)));
}
/**
* @brief Get the configured defined for specific EXTI Line
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
{
return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16));
}
/**
* @brief Enable GPIO Filter
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param GPIOPort This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_GPIO_PORTA
* @arg @ref LL_SYSCFG_GPIO_PORTB
* @arg @ref LL_SYSCFG_GPIO_PORTC
* @arg @ref LL_SYSCFG_GPIO_PORTD
* @arg @ref LL_SYSCFG_GPIO_PORTE
* @param GPIOPin This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_GPIO_PIN_0
* @arg @ref LL_SYSCFG_GPIO_PIN_1
* @arg @ref LL_SYSCFG_GPIO_PIN_2
* @arg @ref LL_SYSCFG_GPIO_PIN_3
* @arg @ref LL_SYSCFG_GPIO_PIN_4
* @arg @ref LL_SYSCFG_GPIO_PIN_5
* @arg @ref LL_SYSCFG_GPIO_PIN_6
* @arg @ref LL_SYSCFG_GPIO_PIN_7
* @arg @ref LL_SYSCFG_GPIO_PIN_8
* @arg @ref LL_SYSCFG_GPIO_PIN_9
* @arg @ref LL_SYSCFG_GPIO_PIN_10
* @arg @ref LL_SYSCFG_GPIO_PIN_11
* @arg @ref LL_SYSCFG_GPIO_PIN_12
* @arg @ref LL_SYSCFG_GPIO_PIN_13
* @arg @ref LL_SYSCFG_GPIO_PIN_14
* @arg @ref LL_SYSCFG_GPIO_PIN_15
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableGPIOFilter(uint32_t GPIOPort, uint32_t GPIOPin)
{
if(GPIOPort == LL_SYSCFG_GPIO_PORTA)
{
SET_BIT(SYSCFG->PAENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTB)
{
SET_BIT(SYSCFG->PBENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTC)
{
SET_BIT(SYSCFG->PCENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTD)
{
SET_BIT(SYSCFG->PDENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTE)
{
SET_BIT(SYSCFG->PEENS, GPIOPin);
}
else
{
}
}
/**
* @brief Disable GPIO Filter
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param GPIOPort This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_GPIO_PORTA
* @arg @ref LL_SYSCFG_GPIO_PORTB
* @arg @ref LL_SYSCFG_GPIO_PORTC
* @arg @ref LL_SYSCFG_GPIO_PORTD
* @arg @ref LL_SYSCFG_GPIO_PORTE
* @param GPIOPin This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_GPIO_PIN_0
* @arg @ref LL_SYSCFG_GPIO_PIN_1
* @arg @ref LL_SYSCFG_GPIO_PIN_2
* @arg @ref LL_SYSCFG_GPIO_PIN_3
* @arg @ref LL_SYSCFG_GPIO_PIN_4
* @arg @ref LL_SYSCFG_GPIO_PIN_5
* @arg @ref LL_SYSCFG_GPIO_PIN_6
* @arg @ref LL_SYSCFG_GPIO_PIN_7
* @arg @ref LL_SYSCFG_GPIO_PIN_8
* @arg @ref LL_SYSCFG_GPIO_PIN_9
* @arg @ref LL_SYSCFG_GPIO_PIN_10
* @arg @ref LL_SYSCFG_GPIO_PIN_11
* @arg @ref LL_SYSCFG_GPIO_PIN_12
* @arg @ref LL_SYSCFG_GPIO_PIN_13
* @arg @ref LL_SYSCFG_GPIO_PIN_14
* @arg @ref LL_SYSCFG_GPIO_PIN_15
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableGPIOFilter(uint32_t GPIOPort, uint32_t GPIOPin)
{
if(GPIOPort == LL_SYSCFG_GPIO_PORTA)
{
CLEAR_BIT(SYSCFG->PAENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTB)
{
CLEAR_BIT(SYSCFG->PBENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTC)
{
CLEAR_BIT(SYSCFG->PCENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTD)
{
CLEAR_BIT(SYSCFG->PDENS, GPIOPin);
}
else if(GPIOPort == LL_SYSCFG_GPIO_PORTE)
{
CLEAR_BIT(SYSCFG->PEENS, GPIOPin);
}
else
{
}
}
/**
* @brief Enable GPIO Analog Mode
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param GPIOAnalogEnable This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_GPIO_ENA_PA0
* @arg @ref LL_SYSCFG_GPIO_ENA_PA1
* @arg @ref LL_SYSCFG_GPIO_ENA_PA2
* @arg @ref LL_SYSCFG_GPIO_ENA_PA3
* @arg @ref LL_SYSCFG_GPIO_ENA_PA4
* @arg @ref LL_SYSCFG_GPIO_ENA_PA5
* @arg @ref LL_SYSCFG_GPIO_ENA_PA6
* @arg @ref LL_SYSCFG_GPIO_ENA_PA7
* @arg @ref LL_SYSCFG_GPIO_ENA_PB0
* @arg @ref LL_SYSCFG_GPIO_ENA_PB1
* @arg @ref LL_SYSCFG_GPIO_ENA_PC0
* @arg @ref LL_SYSCFG_GPIO_ENA_PC1
* @arg @ref LL_SYSCFG_GPIO_ENA_PC2
* @arg @ref LL_SYSCFG_GPIO_ENA_PC3
* @arg @ref LL_SYSCFG_GPIO_ENA_PC4
* @arg @ref LL_SYSCFG_GPIO_ENA_PC5
*/
__STATIC_INLINE void LL_SYSCFG_EnableGPIOAnalogMode(uint32_t GPIOAnalogEnable)
{
SET_BIT(SYSCFG->GPIOENA,GPIOAnalogEnable);
}
/**
* @brief Disable GPIO Analog Mode
* @note Depending on devices and packages, some IOs may not be available.
* Refer to device datasheet for IOs availability.
* @param GPIOAnalogEnable This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_GPIO_ENA_PA0
* @arg @ref LL_SYSCFG_GPIO_ENA_PA1
* @arg @ref LL_SYSCFG_GPIO_ENA_PA2
* @arg @ref LL_SYSCFG_GPIO_ENA_PA3
* @arg @ref LL_SYSCFG_GPIO_ENA_PA4
* @arg @ref LL_SYSCFG_GPIO_ENA_PA5
* @arg @ref LL_SYSCFG_GPIO_ENA_PA6
* @arg @ref LL_SYSCFG_GPIO_ENA_PA7
* @arg @ref LL_SYSCFG_GPIO_ENA_PB0
* @arg @ref LL_SYSCFG_GPIO_ENA_PB1
* @arg @ref LL_SYSCFG_GPIO_ENA_PC0
* @arg @ref LL_SYSCFG_GPIO_ENA_PC1
* @arg @ref LL_SYSCFG_GPIO_ENA_PC2
* @arg @ref LL_SYSCFG_GPIO_ENA_PC3
* @arg @ref LL_SYSCFG_GPIO_ENA_PC4
* @arg @ref LL_SYSCFG_GPIO_ENA_PC5
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableGPIOAnalogMode(uint32_t GPIOAnalogEnable)
{
CLEAR_BIT(SYSCFG->GPIOENA,GPIOAnalogEnable);
}
/**
* @brief Enable the timer clock 2X pclk
* @note Depending on devices and packages, some timers may not be available.
* Refer to device datasheet for timers availability.
* @param TimerSelect This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIM2_3_4_5_6_7_12_13_14_SEL
* @arg @ref LL_SYSCFG_TIM1_8_9_10_11_SEL
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableTimerClock2xPclk(uint32_t TimerSelect)
{
CLEAR_BIT(SYSCFG->TIM_CLK_EXT,TimerSelect);
}
/**
* @brief Disable the timer clock 2X pclk
* @note Depending on devices and packages, some timers may not be available.
* Refer to device datasheet for timers availability.
* @param TimerSelect This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIM2_3_4_5_6_7_12_13_14_SEL
* @arg @ref LL_SYSCFG_TIM1_8_9_10_11_SEL
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableTimerClock2xPclk(uint32_t TimerSelect)
{
SET_BIT(SYSCFG->TIM_CLK_EXT,TimerSelect);
}
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
* @{
*/
/**
* @brief Set FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
* @param Latency This parameter can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_3
* @arg @ref LL_FLASH_LATENCY_4
* @arg @ref LL_FLASH_LATENCY_5
* @arg @ref LL_FLASH_LATENCY_6
* @retval None
*/
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}
/**
* @brief Get FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
* @retval Returned value can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_3
* @arg @ref LL_FLASH_LATENCY_4
* @arg @ref LL_FLASH_LATENCY_5
* @arg @ref LL_FLASH_LATENCY_6
*/
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
* @{
*/
/**
* @brief Return the device revision identifier
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
}
/**
* @brief Enable the Debug Module during SLEEP mode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Disable the Debug Module during SLEEP mode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Indicate if enable the Debug Module during SLEEP mode
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGSleepMode(void)
{
return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP) == (DBGMCU_CR_DBG_SLEEP)) ? 1UL : 0UL);
}
/**
* @brief Enable the Debug Module during STOP mode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Indicate if enable the Debug Module during STOP mode
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGStopMode(void)
{
return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP) == (DBGMCU_CR_DBG_STOP)) ? 1UL : 0UL);
}
/**
* @brief Enable the Debug Module during Standby mode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STDBY);
}
/**
* @brief Disable the Debug Module during Standby mode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STDBY);
}
/**
* @brief Indicate if enable the Debug Module during Standby mode
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGStandbyMode(void)
{
return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STDBY) == (DBGMCU_CR_DBG_STDBY)) ? 1UL : 0UL);
}
/**
* @brief Set Trace pin assignment control
* @param PinAssignment This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}
/**
* @brief Get Trace pin assignment control
* @retval PinAssignment This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment()
{
return (READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}
/**
* @brief Freeze peripherals.
* @note Depending on devices and packages, some Peripherals may not be available.
* Refer to device datasheet for Peripherals availability.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_IWDG_STOP
* @arg @ref LL_DBGMCU_WWDG_STOP
* @arg @ref LL_DBGMCU_TIM1_STOP
* @arg @ref LL_DBGMCU_TIM2_STOP
* @arg @ref LL_DBGMCU_TIM3_STOP
* @arg @ref LL_DBGMCU_TIM4_STOP
* @arg @ref LL_DBGMCU_CAN_STOP
* @arg @ref LL_DBGMCU_I2C1_SMBUS_TIMEOUT
* @arg @ref LL_DBGMCU_I2C2_SMBUS_TIMEOUT
* @arg @ref LL_DBGMCU_TIM8_STOP
* @arg @ref LL_DBGMCU_TIM5_STOP
* @arg @ref LL_DBGMCU_TIM6_STOP
* @arg @ref LL_DBGMCU_TIM7_STOP
* @arg @ref LL_DBGMCU_TIM12_STOP
* @arg @ref LL_DBGMCU_TIM13_STOP
* @arg @ref LL_DBGMCU_TIM14_STOP
* @arg @ref LL_DBGMCU_TIM9_STOP
* @arg @ref LL_DBGMCU_TIM10_STOP
* @arg @ref LL_DBGMCU_TIM11_STOP
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->CR, Periphs);
}
/**
* @brief Unfreeze peripherals.D
* @note Depending on devices and packages, some Peripherals may not be available.
* Refer to device datasheet for Peripherals availability.
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_IWDG_STOP
* @arg @ref LL_DBGMCU_WWDG_STOP
* @arg @ref LL_DBGMCU_TIM1_STOP
* @arg @ref LL_DBGMCU_TIM2_STOP
* @arg @ref LL_DBGMCU_TIM3_STOP
* @arg @ref LL_DBGMCU_TIM4_STOP
* @arg @ref LL_DBGMCU_CAN_STOP
* @arg @ref LL_DBGMCU_I2C1_SMBUS_TIMEOUT
* @arg @ref LL_DBGMCU_I2C2_SMBUS_TIMEOUT
* @arg @ref LL_DBGMCU_TIM8_STOP
* @arg @ref LL_DBGMCU_TIM5_STOP
* @arg @ref LL_DBGMCU_TIM6_STOP
* @arg @ref LL_DBGMCU_TIM7_STOP
* @arg @ref LL_DBGMCU_TIM12_STOP
* @arg @ref LL_DBGMCU_TIM13_STOP
* @arg @ref LL_DBGMCU_TIM14_STOP
* @arg @ref LL_DBGMCU_TIM9_STOP
* @arg @ref LL_DBGMCU_TIM10_STOP
* @arg @ref LL_DBGMCU_TIM11_STOP
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->CR, Periphs);
}
/**
* @brief Indicate if Freeze peripherals.
* @note Depending on devices and packages, some Peripherals may not be available.
* Refer to device datasheet for Peripherals availability.
* @param Periphs This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_IWDG_STOP
* @arg @ref LL_DBGMCU_WWDG_STOP
* @arg @ref LL_DBGMCU_TIM1_STOP
* @arg @ref LL_DBGMCU_TIM2_STOP
* @arg @ref LL_DBGMCU_TIM3_STOP
* @arg @ref LL_DBGMCU_TIM4_STOP
* @arg @ref LL_DBGMCU_CAN_STOP
* @arg @ref LL_DBGMCU_I2C1_SMBUS_TIMEOUT
* @arg @ref LL_DBGMCU_I2C2_SMBUS_TIMEOUT
* @arg @ref LL_DBGMCU_TIM8_STOP
* @arg @ref LL_DBGMCU_TIM5_STOP
* @arg @ref LL_DBGMCU_TIM6_STOP
* @arg @ref LL_DBGMCU_TIM7_STOP
* @arg @ref LL_DBGMCU_TIM12_STOP
* @arg @ref LL_DBGMCU_TIM13_STOP
* @arg @ref LL_DBGMCU_TIM14_STOP
* @arg @ref LL_DBGMCU_TIM9_STOP
* @arg @ref LL_DBGMCU_TIM10_STOP
* @arg @ref LL_DBGMCU_TIM11_STOP
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_DBGMCU_IsFreezePeriph(uint32_t Periphs)
{
return ((READ_BIT(DBGMCU->CR, Periphs) == (Periphs)) ? 1UL : 0UL);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* PY32F403_LL_SYSTEM_H */
/************************ (C) COPYRIGHT Puya *****END OF FILE****/