/*
  ******************************************************************************
  * @file    driver_ST7735S.c
  * @author  �Ϻ�����
  * @version V1.0.0
  * @date    2023
  * @brief   ST7735S driver.
  *          This file provides firmware functions to manage gc9c01 
  *          with SPI and DMA. User should set GPIO, dma channel, spi
  *          channel according actual resource allocation.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2023 Bixdo.
  * All rights reserved.
  ******************************************************************************
*/
#include "ALLinclude.h"

  uint32_t DataPressure ;
	uint32_t DataPressure_BK=331449;
  #define DataPressureOverload 332042
	
void FunctionReadPressure(void)
{
	static uint32_t TimerOverLoad;
	
#if CSU18M68 == 1
	
  static uint8_t Data_E1[2];
	static uint8_t Data_E2[2];
	static uint8_t Data_ID[2];
  VL53L0X_read_multi(DeviceAddress,Index_JustData,&Data_E1[0],2);
	 VL53L0X_read_multi(DeviceAddress,Index_Status,&Data_E2[0],2);
	VL53L0X_read_multi(DeviceAddress,Index_ID,&Data_ID[0],2);
#endif

#if PMDS_F2 == 1
	
PMDS_Read_Result( _RES0_ADDR,                    //要读取的测量通道结果寄存器地址
                  PMDS_Fx.RESx.buff,            //存储结果寄存器数据的缓存
                32);
	DataPressure=PMDS_Fx.RESx.buff[30]<<16 | PMDS_Fx.RESx.buff[29]<<8 | PMDS_Fx.RESx.buff[28];
	if(DataPressure>DataPressureOverload	&& DataPressure<0xF0F0F0)
  {
    if(TimerOverLoad<0xffffffff)TimerOverLoad++;
    if(TimerOverLoad = 5)
    {
      SendCmd(eCmdPressureOverload);
    }
  }
  else
  {
    TimerOverLoad =0;
  }
#endif 
}

void FunctionAdjustPressure(void)
{
  static uint8_t Data_E2[2];
  uint8_t CmdAdjust = 0x01;
#if CSU18M68 == 1
  VL53L0X_write_multi(DeviceAddress,Index_Adjust,&CmdAdjust,1);
  vTaskDelay(2);
  VL53L0X_read_multi(DeviceAddress,Index_Status,&Data_E2[0],2);
#endif

}


/*********************************************END OF FILE*********************************************/