You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.
================================================================================
样例使用说明
Sample Description
================================================================================
功能描述：
此样例演示了stop模式下，
Function descriptions:
This sample demonstrates the GPIO external interrupt wake-up feature in stop mode.
================================================================================
测试环境：
测试用板：
MDK版本：
IAR版本：
GCC版本：
Test environment:
Test board: PY32F403_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU， ；
2. LED灯亮， ， ， ；
3. 在PA06上产生一个下降沿， ；
4. LED以500ms的间隔进行翻转。
Example execution steps:
1. Compile and download the program to the MCU and run it;
2. The LED will be on initially. Press the button, and the LED will turn off,
entering stop mode;
3. Generate a falling edge on PA06, and the program will exit stop mode;
4. The LED will toggle at intervals of 500ms.
================================================================================
注意事项：
1， ， ，
DBGMCU_CR.DBG_STOP置位。
Notes:
1.To demonstrate this sample function, it is necessary to disconnect the SWD
cable and power it back on, as by default, the emulator will reset the
DBGMCU_CR.DBG_STOP position.
================================================================================