developerA
/
Z30
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
main
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'main'
${ noResults }
Z30/Projects/PY32F403-STK/Example_LL/TIM/TIM1_InputCapture
History
DeveloperAlpha 48b48663ce -u origin main 3 months ago
..
EIDE -u origin main 3 months ago
EWARM -u origin main 3 months ago
Inc -u origin main 3 months ago
MDK-ARM -u origin main 3 months ago
Src -u origin main 3 months ago
readme.txt -u origin main 3 months ago

readme.txt
Unescape Escape

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了TIM1的输入捕获功能。配置PA8为通道1的输入引脚,每当引脚电平出现上升沿
时会触发捕获中断,并在中断处理中翻转LED。

Function descriptions:
This sample demonstrates the input capture functionality of TIM1 . Configure 
PA8 as the input capture pin. Whenever an rising edge is detected on PA8, it 
triggers the capture interrupt and toggles the LED in the interrupt callback 
function.
================================================================================
测试环境：
测试用板：PY32F403_STK
MDK版本： 5.28
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32F403_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU,并运行
2. PA8每给一次上升沿,LED灯翻转一次

Example execution steps:
1.Compile and download the program to the MCU, and then run it.
2.Generate a rising edge on the PA8 pin, and the LED will toggle.
================================================================================
注意事项：

Notes:

================================================================================