You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.
================================================================================
样例使用说明
Sample Description
================================================================================
功能描述：
此样例演示了TIM1的输出比较模式。将捕获/比较通道1(CH1)的输出映射到PA8，
/比较通道1(CH1)并设置为比较输出翻转模式
Function descriptions:
This sample demonstrates the output compare mode of TIM1. The output of
capture/compare channel 1 (CH1) is mapped to pin PA8. Capture/compare
channel 1 (CH1) is enabled and set to compare output toggle mode.
================================================================================
测试环境：
测试用板：
MDK版本：
IAR版本：
GCC 版本：
Test environment:
Test board: PY32F403_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，
2. 使用示波器观察PA8，
Example execution steps:
1.Compile and download the program to the MCU, and then run it.
2.Use an oscilloscope to observe pin PA8. The frequency should be 5Hz.
================================================================================
注意事项：
Notes:
================================================================================