You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

558 lines
23 KiB
C

/**
******************************************************************************
* @file py32f403_hal_flash.h
* @author MCU Application Team
* @brief Header file of FLASH HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2023 Puya Semiconductor Co.
* All rights reserved.</center></h2>
*
* This software component is licensed by Puya under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __PY32F403_HAL_FLASH_H
#define __PY32F403_HAL_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "py32f403_hal_def.h"
/** @addtogroup PY32F403_HAL_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Erase structure definition
*/
typedef struct
{
uint32_t TypeErase; /*!< Mass erase or page erase.
This parameter can be a value of @ref FLASH_Type_Erase */
uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase /sector erase /block erase is disabled
This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_END */
uint32_t NbPages; /*!< Number of pages to be erased.
This parameter must be a value between 1 and (FLASH_PAGE_NB - value of initial page)*/
uint32_t SectorAddress; /*!< SectorAddress: Initial FLASH sector address to erase when mass erase /page erase /block erase is disabled
This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_END */
uint32_t NbSectors; /*!< Number of sectors to be erased.
This parameter must be a value between 1 and (FLASH_SECTOR_NB - value of initial sector)*/
uint32_t BlockAddress; /*!< BlockAddress: Initial FLASH block address to erase when mass erase /page erase /sector erase is disabled
This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_END */
uint32_t NbBlocks; /*!< Number of blocks to be erased.
This parameter must be a value between 1 and (FLASH_BLOCK_NB - value of initial block)*/
} FLASH_EraseInitTypeDef;
/**
* @brief FLASH Option Bytes PROGRAM structure definition
*/
typedef struct
{
uint32_t OptionType; /*!< OptionType: Option byte to be configured.
This parameter can be a value of @ref FLASH_Option_Type */
uint32_t WRPBlock; /*!< WRPBlock: This bitfield specifies the block (s) which are write protected.
This parameter can be a combination of @ref FLASH_Option_Bytes_Write_Protection */
uint32_t RDPLevel; /*!< RDPLevel: Set the read protection level.
This parameter can be a value of @ref FLASH_OB_Read_Protection */
uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER).
This parameter can be a combination of @ref FLASH_OB_USER_Type */
uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER).
This parameter can be a combination of
@ref FLASH_OB_USER_IWDG_SW,
@ref FLASH_OB_USER_NRST_STDBY,
@ref FLASH_OB_USER_NRST_STOP */
} FLASH_OBProgramInitTypeDef;
/**
* @brief FLASH handle Structure definition
*/
typedef struct
{
HAL_LockTypeDef Lock; /* FLASH locking object */
uint32_t ErrorCode; /* FLASH error code */
uint32_t ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
uint32_t Address; /* Internal variable to save address selected for program in IT context */
uint32_t PageOrSectorOrBlock; /* Internal variable to define the current page or sector or block which is erasing in IT context */
uint32_t NbPagesSectorsBlocksToErase; /* Internal variable to save the remaining pages to erase in IT context */
} FLASH_ProcessTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASH_Latency FLASH Latency
* @{
*/
#define FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */
#define FLASH_LATENCY_3 (FLASH_ACR_LATENCY_0 | FLASH_ACR_LATENCY_1) /*!< FLASH Three wait state */
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_2 /*!< FLASH Four wait state */
#define FLASH_LATENCY_5 (FLASH_ACR_LATENCY_0 | FLASH_ACR_LATENCY_2) /*!< FLASH Five wait state */
#define FLASH_LATENCY_6 (FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_2) /*!< FLASH Six wait state */
/**
* @}
*/
/** @defgroup FLASH_Type_Erase FLASH erase type
* @{
*/
#define FLASH_TYPEERASE_MASSERASE (FLASH_CR_MER) /*!<Flash mass erase activation*/
#define FLASH_TYPEERASE_PAGEERASE (FLASH_CR_PER) /*!<Flash page erase activation*/
#define FLASH_TYPEERASE_SECTORERASE (FLASH_CR_SER) /*!<Flash sector erase activation*/
#define FLASH_TYPEERASE_BLOCKERASE (FLASH_CR_BER) /*!<Flash block erase activation*/
/**
* @}
*/
/** @defgroup FLASH_Flags FLASH Flags Definition
* @{
*/
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Operation Busy flag */
#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option validity error flag */
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protection error flag */
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of operation flag */
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_WRPERR | FLASH_FLAG_OPTVERR)
/**
* @}
*/
/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition
* @brief FLASH Interrupt definition
* @{
*/
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_OPERR FLASH_CR_ERRIE /*!< Error Interrupt source */
/**
* @}
*/
/** @defgroup FLASH_Error FLASH Error
* @{
*/
#define HAL_FLASH_ERROR_NONE 0x00000000U
#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR
#define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
* @{
*/
#define OB_WRP_BLOCK_0 FLASH_WRPR_WRP_0 /* Write protection of Block0 */
#define OB_WRP_BLOCK_1 FLASH_WRPR_WRP_1 /* Write protection of Block1 */
#define OB_WRP_BLOCK_2 FLASH_WRPR_WRP_2 /* Write protection of Block2 */
#define OB_WRP_BLOCK_3 FLASH_WRPR_WRP_3 /* Write protection of Block3 */
#define OB_WRP_BLOCK_4 FLASH_WRPR_WRP_4 /* Write protection of Block4 */
#define OB_WRP_BLOCK_5 FLASH_WRPR_WRP_5 /* Write protection of Block5 */
#define OB_WRP_BLOCK_6 FLASH_WRPR_WRP_6 /* Write protection of Block6 */
#define OB_WRP_BLOCK_7 FLASH_WRPR_WRP_7 /* Write protection of Block7 */
#define OB_WRP_BLOCK_8 FLASH_WRPR_WRP_8 /* Write protection of Block8 */
#define OB_WRP_BLOCK_9 FLASH_WRPR_WRP_9 /* Write protection of Block9 */
#define OB_WRP_BLOCK_10 FLASH_WRPR_WRP_10 /* Write protection of Block10 */
#define OB_WRP_BLOCK_11 FLASH_WRPR_WRP_11 /* Write protection of Block11 */
#define OB_WRP_Pages0to127 OB_WRP_BLOCK_0 /* Write protection of Block0 */
#define OB_WRP_Pages128to255 OB_WRP_BLOCK_1 /* Write protection of Block1 */
#define OB_WRP_Pages256to383 OB_WRP_BLOCK_2 /* Write protection of Block2 */
#define OB_WRP_Pages384to511 OB_WRP_BLOCK_3 /* Write protection of Block3 */
#define OB_WRP_Pages512to639 OB_WRP_BLOCK_4 /* Write protection of Block4 */
#define OB_WRP_Pages640to767 OB_WRP_BLOCK_5 /* Write protection of Block5 */
#define OB_WRP_Pages768to895 OB_WRP_BLOCK_6 /* Write protection of Block6 */
#define OB_WRP_Pages896to1023 OB_WRP_BLOCK_7 /* Write protection of Block7 */
#define OB_WRP_Pages1024to1151 OB_WRP_BLOCK_8 /* Write protection of Block8 */
#define OB_WRP_Pages1152to1279 OB_WRP_BLOCK_9 /* Write protection of Block9 */
#define OB_WRP_Pages1280to1407 OB_WRP_BLOCK_10 /* Write protection of Block10 */
#define OB_WRP_Pages1408to1535 OB_WRP_BLOCK_11 /* Write protection of Block11 */
#define OB_WRP_AllPages FLASH_WRPR_WRP /* Write protection of all Blocks */
/**
* @}
*/
/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection
* @{
*/
#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
#define OB_RDP_LEVEL_1 ((uint8_t)0x55U)
/**
* @}
*/
/** @defgroup FLASH_OB_USER_Type FLASH User Option Type
* @{
*/
#define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW
#define OB_USER_NRST_STOP FLASH_OPTR_NRST_STOP
#define OB_USER_NRST_STDBY FLASH_OPTR_NRST_STDBY
#define OB_USER_ALL (OB_USER_NRST_STOP | OB_USER_NRST_STDBY | OB_USER_IWDG_SW)
/**
* @}
*/
/** @defgroup FLASH_Type_Program FLASH type program
* @{
*/
#define FLASH_TYPEPROGRAM_PAGE (FLASH_CR_PG) /*!<Program 256bytes at a specified address.*/
/**
* @}
*/
/** @defgroup FLASH_Option_Type FLASH Option Type
* @{
*/
#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!<WRP option byte configuration*/
#define OPTIONBYTE_RDP ((uint32_t)0x04U) /*!<RDP option byte configuration*/
#define OPTIONBYTE_USER ((uint32_t)0x08U) /*!<USER option byte configuration*/
#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER)
/**
* @}
*/
/** @defgroup FLASH_WRP_State FLASH WRP State
* @{
*/
#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!<Disable the write protection of the desired blocks*/
#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!<Enable the write protection of the desired blocks*/
/**
* @}
*/
/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes IWatchdog
* @{
*/
#define OB_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint8_t)0x0000U) /*!< Hardware IWDG selected */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_NRST_STDBY FLASH Option Bytes NRST_STDBY
* @{
*/
#define OB_STDBY_RST ((uint8_t)0x0000U) /*!< Reset generated when entering Standby mode */
#define OB_STDBY_NORST FLASH_OPTR_NRST_STDBY /*!< No reset generated when entering Standby mode */
/**
* @}
*/
/** @defgroup FLASH_OB_USER_NRST_STOP FLASH Option Bytes NRST_STOP
* @{
*/
#define OB_STOP_RST ((uint8_t)0x0000U) /*!< Reset generated when entering Stop mode */
#define OB_STOP_NORST FLASH_OPTR_NRST_STOP /*!< No reset generated when entering Stop mode*/
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
* @brief macros to control FLASH features
* @{
*/
/**
* @brief Set the FLASH Latency.
* @param __LATENCY__ FLASH Latency
* This parameter can be one of the following values :
* @arg @ref FLASH_LATENCY_0 FLASH Zero wait state
* @arg @ref FLASH_LATENCY_1 FLASH One wait state
* @arg @ref FLASH_LATENCY_3 FLASH Three wait states
* @arg @ref FLASH_LATENCY_4 FLASH Four wait states
* @arg @ref FLASH_LATENCY_5 FLASH Five wait states
* @retval None
*/
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__))
/**
* @brief Get the FLASH Latency.
* @retval FLASH Latency
* Returned value can be one of the following values :
* @arg @ref FLASH_LATENCY_0 FLASH Zero wait state
* @arg @ref FLASH_LATENCY_1 FLASH One wait state
* @arg @ref FLASH_LATENCY_3 FLASH Three wait states
* @arg @ref FLASH_LATENCY_4 FLASH Four wait states
* @arg @ref FLASH_LATENCY_5 FLASH Five wait states
*/
#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)
/** @defgroup FLASH_Interrupt FLASH Interrupts Macros
* @brief macros to handle FLASH interrupts
* @{
*/
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
* @arg @ref FLASH_IT_OPERR Error Interrupt
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT(FLASH->CR, (__INTERRUPT__))
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
* @arg @ref FLASH_IT_OPERR Error Interrupt
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(FLASH->CR, (__INTERRUPT__))
/**
* @brief Check whether the specified FLASH flag is set or not.
* @param __FLAG__ specifies the FLASH flag to check.
* This parameter can be one of the following values:
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag
* @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag
* @arg @ref FLASH_FLAG_BSY FLASH write/erase operations in progress flag
* @arg @ref FLASH_FLAG_ALL_ERRORS FLASH All errors flags
* @retval The new state of FLASH_FLAG (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG(__FLAG__) (READ_BIT(FLASH->SR, (__FLAG__)) == (__FLAG__))
/**
* @brief Clear the FLASHs pending flags.
* @param __FLAG__ specifies the FLASH flags to clear.
* This parameter can be any combination of the following values:
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag
* @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag
* @arg @ref FLASH_FLAG_ALL_ERRORS FLASH All errors flags
* @retval None
*/
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { WRITE_REG(FLASH->SR, (__FLAG__)); \
} while(0U)
/**
* @}
*/
/**
* @}
*/
/* Include FLASH HAL Extended module */
/* Exported variables --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Variables FLASH Exported Variables
* @{
*/
extern FLASH_ProcessTypeDef pFlash;
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_Exported_Functions
* @{
*/
/* Program operation functions ***********************************************/
/** @addtogroup FLASH_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t *DataAddr );
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t *DataAddr);
HAL_StatusTypeDef HAL_FLASH_PageProgram(uint32_t Address, uint32_t *DataAddr );
HAL_StatusTypeDef HAL_FLASH_PageProgram_IT(uint32_t Address, uint32_t *DataAddr);
/* FLASH IRQ handler method */
void HAL_FLASH_IRQHandler(void);
/* Callbacks in non blocking modes */
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
HAL_StatusTypeDef HAL_FLASH_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
HAL_StatusTypeDef HAL_FLASH_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
#define HAL_FLASHEx_Erase HAL_FLASH_Erase
#define HAL_FLASHEx_Erase_IT HAL_FLASH_Erase_IT
/**
* @}
*/
/* Peripheral Control functions **********************************************/
/** @addtogroup FLASH_Exported_Functions_Group2
* @{
*/
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_Lock(void);
/* Option bytes control */
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
HAL_StatusTypeDef HAL_FLASH_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
void HAL_FLASH_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
HAL_StatusTypeDef HAL_FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
/**
* @}
*/
/* Peripheral State functions ************************************************/
/** @addtogroup FLASH_Exported_Functions_Group3
* @{
*/
uint32_t HAL_FLASH_GetError(void);
/**
* @}
*/
/**
* @}
*/
/* Private types --------------------------------------------------------*/
/** @defgroup FLASH_Private_types FLASH Private Types
* @{
*/
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/* Private constants --------------------------------------------------------*/
/** @defgroup FLASH_Private_Constants FLASH Private Constants
* @{
*/
#define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */
#define FLASH_TYPENONE 0x00000000U /*!< No Programmation Procedure On Going */
#define FLASH_FLAG_SR_ERROR (FLASH_FLAG_OPTVERR | FLASH_FLAG_WRPERR) /*!< All SR error flags */
#define FLASH_FLAG_SR_CLEAR (FLASH_FLAG_SR_ERROR | FLASH_SR_EOP)
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASH_Private_Macros FLASH Private Macros
* @{
*/
#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL)))
#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL)))
#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) (IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__))
#define IS_FLASH_NB_PAGES(__ADDRESS__, __VALUE__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__ + (__VALUE__*FLASH_PAGE_SIZE)) <= (FLASH_BASE + FLASH_SIZE - 1UL))&&(__VALUE__ >0 ))
#define IS_FLASH_NB_SECTORS(__ADDRESS__, __VALUE__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__ + (__VALUE__*FLASH_SECTOR_SIZE)) <= (FLASH_BASE + FLASH_SIZE - 1UL))&&(__VALUE__>0 ))
#define IS_FLASH_NB_BLOCKS(__ADDRESS__, __VALUE__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__ + (__VALUE__*FLASH_BLOCK_SIZE)) <= (FLASH_BASE + FLASH_SIZE - 1UL)) &&(__VALUE__ >0 ))
#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL)))
#define IS_FLASH_PAGE(__PAGE__) ((__PAGE__) < FLASH_PAGE_NB)
#define IS_FLASH_BANK(__BANK__) ((__BANK__) == 0x00UL)
#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGEERASE) || \
((__VALUE__) == FLASH_TYPEERASE_SECTORERASE) || \
((__VALUE__) == FLASH_TYPEERASE_BLOCKERASE) || \
((__VALUE__) == FLASH_TYPEERASE_MASSERASE))
#define IS_FLASH_TYPEPROGRAM(__VALUE__) ((__VALUE__) == FLASH_TYPEPROGRAM_PAGE)
#define IS_OPTIONBYTE(__VALUE__) ((((__VALUE__) & OPTIONBYTE_ALL) != 0x00U) && \
(((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U))
#define IS_OB_RDP_LEVEL(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\
((__LEVEL__) == OB_RDP_LEVEL_1))
#define IS_OB_USER_TYPE(__TYPE__) ((((__TYPE__) & OB_USER_ALL) != 0x00U) && \
(((__TYPE__) & ~OB_USER_ALL) == 0x00U))
#define IS_OB_USER_CONFIG(__TYPE__,__CONFIG__) ((~(__TYPE__) & (__CONFIG__)) == 0x00U)
#if defined(FLASH_PCROP_SUPPORT)
#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U)
#endif
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE) || ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH))
#define IS_OB_SEC_SIZE(__VALUE__) ((__VALUE__) < (FLASH_PAGE_NB + 1U))
#endif
#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
((__LATENCY__) == FLASH_LATENCY_1) || \
((__LATENCY__) == FLASH_LATENCY_3) || \
((__LATENCY__) == FLASH_LATENCY_4) || \
((__LATENCY__) == FLASH_LATENCY_5) || \
((__LATENCY__) == FLASH_LATENCY_6))
#define IS_WRPSTATE(__VALUE__) (((__VALUE__) == OB_WRPSTATE_DISABLE) || \
((__VALUE__) == OB_WRPSTATE_ENABLE))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __PY32F403_HAL_FLASH_H */
/************************ (C) COPYRIGHT Puya *****END OF FILE******************/