|
|
================================================================================
|
|
|
样例使用说明
|
|
|
Sample Description
|
|
|
================================================================================
|
|
|
功能描述：
|
|
|
此样例实现了定时器的基本计数功能，以及演示了ARR自动重载功能，样例在定时器重载中断
|
|
|
中翻转LED灯。
|
|
|
|
|
|
Function descriptions:
|
|
|
This sample demonstrates base count function of the timer,and show ARR register
|
|
|
autoreload function.Example toggle LED in timer update interrupt.
|
|
|
================================================================================
|
|
|
测试环境：
|
|
|
测试用板：PY32F403_STK
|
|
|
MDK版本： 5.28
|
|
|
IAR版本： 9.20
|
|
|
GCC版本：GNU Arm Embedded Toolchain 10.3-2021.10
|
|
|
|
|
|
Test environment:
|
|
|
Test board: PY32F403_STK
|
|
|
MDK Version: 5.28
|
|
|
IAR Version: 9.20
|
|
|
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
|
|
|
================================================================================
|
|
|
使用步骤：
|
|
|
1. 编译下载程序并运行；
|
|
|
2. LED灯闪烁，用示波器观测PA1引脚
|
|
|
3. PA1在第三次翻转时，周期变为2.5Hz
|
|
|
|
|
|
Example execution steps:
|
|
|
1. compile and download the program to MCU and run it;
|
|
|
2. LED light blinked, observe PA1 pin with oscilloscope
|
|
|
3. When PA1 is flipped for the third time, the period becomes 2.5Hz
|
|
|
================================================================================
|
|
|
注意事项：
|
|
|
修改main.c中
|
|
|
配置TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;使能自动重载
|
|
|
功能，新的ARR值在第四次进中断时生效；
|
|
|
配置TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;禁止自动重
|
|
|
载功能，新的ARR值在第三次进中断时生效,生效后，LED灯以1.25HZ的频率翻转。
|
|
|
|
|
|
Notes:
|
|
|
Modify in main.c.
|
|
|
Set TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE to enable
|
|
|
autoreload,and new ARR value will takes effect on the fourth interrupt generate.
|
|
|
Set TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE to disable
|
|
|
autoreload,and new ARR value will takes effect on the third interrupt generate.
|
|
|
After taking effect, the LED lights blinked at a frequency of 1.25HZ.
|
|
|
================================================================================ |